Asus tuf dash f15 keyboard replacement

Introduction

The ASUS TUF Dash F15 is a highperformance laptop that designed for gaming and other intensive tasks. Like any other laptop the keyboard is an essential component and over time it can become worn out or damaged. If you’re experiencing issues with your keyboard such as keys that don’t respond or keys that are missing it might be time to replace it. In this guide we’ll walk you through the steps you need to take to replace the keyboard on your ASUS TUF Dash F15 laptop.

Tools You’ll Need Before you start the replacement process you’ll need a few tools. Here what you’ll need:

A small Phillips head screwdriver

A plastic opening tool

A spudger or a similar tool for prying

Step 1: Turn off Your Laptop

Before you start disassembling your laptop make sure it turned off and unplugged from any power source. This is important to ensure your safety and to prevent any damage to your laptop.

Step 2: Remove the Bottom Cover

To access the keyboard you’ll need to remove the bottom cover of your laptop. Use your Phillips head screwdriver to remove the screws that secure the bottom cover to the laptop. There are about 10 screws in total so make sure you keep track of them.

Step 3: Disconnect the Battery

Once you’ve removed the screws you’ll need to disconnect the battery before you can remove the bottom cover. Use your plastic opening tool to carefully pry up the battery connector from the motherboard.

Step 4: Remove the Keyboard

Screws With the bottom cover removed you can now see the keyboard. There are two screws that secure the keyboard in place located at the top of the keyboard. Use your Phillips head screwdriver to remove these screws.

Step 5: Remove the Keyboard

With the screws removed you can now lift the keyboard up slightly. You’ll need to disconnect the keyboard ribbon cable from the motherboard. To do this use your spudger or a similar tool to carefully pry up the locking tab on the keyboard connector. Once the tab is lifted you can gently pull the ribbon cable out of the connector.

Step 6: Install the New Keyboard

To install the new keyboard simply reverse the steps you took to remove the old one. Insert the ribbon cable into the connector on the motherboard making sure it seated properly. Then press down on the locking tab to secure the cable in place. Finally replace the keyboard screws and tighten them securely.

Step 7: Reassemble Your Laptop

With the new keyboard installed you can now reassemble your laptop. Start by reconnecting the battery and replacing the bottom cover. Make sure you replace all the screws and tighten them securely. Then power on your laptop and test the new keyboard to ensure everything is working correctly.

Conclusion

Replacing the keyboard on your ASUS TUF Dash F15 laptop is a straightforward process that can be done with a few basic tools. Follow these steps carefully and you’ll have a new keyboard installed in no time.